Store
Gaui Helicopters
Gaui Radio Controlled Helicopters
Newly arrived today is the GAUI EP200 SD, which is the ?bling?version of the normal EP 200. This is a sub-micro sized heli (smaller than a T-Rex 450) and ideal as a fully 3D indoor heli, or even for full 3D outdoors in light winds. It comes fully built with motor, ESC and blades, just install radio gear and go fly. Features The tiniest 3D capable helicopter equipped with all CNC precision metal parts. Equipped with the fiber glass painted canopy. Light-weight 3D canopy ( 9g ) for option. Kit comes with BL motor and ESC. Only a short time needed for completion. (95% factory assembled) The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms. Shaft driven tail rotor system with one-way main gear. 1mm thick CF mainframe and fin set. The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum. CNC titanium anodized aluminum and CF composite result in a light weight and rigid tail gear case. CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control. Fully equipped ball bearings.(34 micro bearings) Seesaw head with bell-hiller system. CCPM collective pitch mechanism (variable pitch). Extensive upgrade parts and option parts available. Specification: Overall length: 415mm (including cabin & canopy) Main rotor diameter: 428mm Tail rotor diameter: 100mm Motor: KV4800 brushless motor (included) ESC : 12A ESC (included) Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.) Main rotor blades: SP Blades(included) or Wooden(option) Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery Items needed for assembly: 6 (or more) channel heli-capable transmitter (with CCPM function) 4 Micro servos (BMS 306BB servo is recommended) 6 (or more) channel micro receiver Gyro ( GU -210 heading hold gyro or higher level are recommended) Battery : Li-Po battery (7.4v~11.1v/800mah) Charger: Li-Po battery charger
$599.95
Features The tiniest 3D capable helicopter equipped with all CNC precision metal parts. Equipped with the fiber glass painted canopy. Light-weight 3D canopy ( 9g ) for option. Kit comes with BL motor and ESC. Only a short time needed for completion. (95% factory assembled) The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms. Shaft driven tail rotor system with one-way main gear. 1mm thick CF mainframe and fin set. The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum. CNC titanium anodized aluminum and CF composite result in a light weight and rigid tail gear case. CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control. Fully equipped ball bearings.(34 micro bearings) Seesaw head with bell-hiller system. CCPM collective pitch mechanism (variable pitch). Extensive upgrade parts and option parts available. Specification: Overall length: 415mm (including cabin & canopy) Main rotor diameter: 428mm Tail rotor diameter: 100mm Motor: KV4800 brushless motor (included) ESC : 12A ESC (included) Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.) Main rotor blades: SP Blades(included) or Wooden(option) Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery Items needed for assembly: 6 (or more) channel heli-capable transmitter (with CCPM function) 4 Micro servos (BMS 306BB servo is recommended) 6 (or more) channel micro receiver Gyro ( GU -210 heading hold gyro or higher level are recommended) Battery : Li-Po battery (7.4v~11.1v/800mah) Charger: Li-Po battery charger
$549.95
The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine. The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. FEATURES: 90% Assembled Carbon Fiber Kit. CNC Head. CNC Tail. Plastic Blades. Decal Sheet. Painted Hi-Quality Fiberglass Canopy. Gaui Brushless Outrunner Motor (4800kv). Brushless ESC (12amp). Assembly Instructions. Choose from the standard belt drive or SD shaft versions. - Features: - The tiniest 3D capable helicopter equipped with all CNC precision metal parts. - Equipped with the fiber glass painted canopy. - Light-weight 3D canopy ( 9g ) for option. - Kit comes with BL motor and ESC. - Only a short time needed for completion. (95% factory assembled) - The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms. - Available with Belt driven tail rotor system with one-way main gear or SD Shaft Drive. - 1mm thick Carbon fiber mainframe and fin set. - The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum. - CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case. - CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control. - Fully equipped ball bearings.(33 micro bearings) - Seesaw head with bell-hiller system. - CCPM collective pitch mechanism (variable pitch). - Extensive upgrade parts and option parts available. - Specifications: - Overall length: 415mm (including cabin and canopy) - Main rotor diameter: 428mm - Tail rotor diameter: 100mm - Motor: KV4800 brushless motor (included) - ESC : 12A ESC (included) - Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.) - Main rotor blades: SP Blades(included) or Wooden(option) - Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
$499.95
The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine. The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. FEATURES: 90% Assembled Carbon Fiber Kit. CNC Head. CNC Tail. Plastic Blades. Decal Sheet. Painted Hi-Quality Fiberglass Canopy. Gaui Brushless Outrunner Motor (4800kv). Brushless ESC (12amp). Assembly Instructions. Choose from the standard belt drive or SD shaft versions. - Features: - The tiniest 3D capable helicopter equipped with all CNC precision metal parts. - Equipped with the fiber glass painted canopy. - Light-weight 3D canopy ( 9g ) for option. - Kit comes with BL motor and ESC. - Only a short time needed for completion. (95% factory assembled) - The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms. - Available with Belt driven tail rotor system with one-way main gear or SD Shaft Drive. - 1mm thick Carbon fiber mainframe and fin set. - The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum. - CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case. - CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control. - Fully equipped ball bearings.(33 micro bearings) - Seesaw head with bell-hiller system. - CCPM collective pitch mechanism (variable pitch). - Extensive upgrade parts and option parts available. - Specifications: - Overall length: 415mm (including cabin and canopy) - Main rotor diameter: 428mm - Tail rotor diameter: 100mm - Motor: KV4800 brushless motor (included) - ESC : 12A ESC (included) - Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.) - Main rotor blades: SP Blades(included) or Wooden(option) - Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
$499.95
The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine. The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. FEATURES: 90% Assembled Carbon Fiber Kit. CNC Head. CNC Tail. Plastic Blades. Decal Sheet. Painted Hi-Quality Fiberglass Canopy. Gaui Brushless Outrunner Motor (4800kv). Brushless ESC (12amp). Assembly Instructions. Choose from the standard belt drive or SD shaft versions. - Features: - The tiniest 3D capable helicopter equipped with all CNC precision metal parts. - Equipped with the fiber glass painted canopy. - Light-weight 3D canopy ( 9g ) for option. - Kit comes with BL motor and ESC. - Only a short time needed for completion. (95% factory assembled) - The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms. - Available with Belt driven tail rotor system with one-way main gear or SD Shaft Drive. - 1mm thick Carbon fiber mainframe and fin set. - The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum. - CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case. - CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control. - Fully equipped ball bearings.(33 micro bearings) - Seesaw head with bell-hiller system. - CCPM collective pitch mechanism (variable pitch). - Extensive upgrade parts and option parts available. - Specifications: - Overall length: 415mm (including cabin and canopy) - Main rotor diameter: 428mm - Tail rotor diameter: 100mm - Motor: KV4800 brushless motor (included) - ESC : 12A ESC (included) - Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.) - Main rotor blades: SP Blades(included) or Wooden(option) - Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
$499.00
Features The tiniest 3D capable helicopter equipped with all CNC precision metal parts. Equipped with the fiber glass painted canopy. Light-weight 3D canopy ( 9g ) for option. Kit comes with BL motor and ESC. Only a short time needed for completion. (95% factory assembled) The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms. Shaft driven tail rotor system with one-way main gear. 1mm thick CF mainframe and fin set. The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum. CNC titanium anodized aluminum and CF composite result in a light weight and rigid tail gear case. CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control. Fully equipped ball bearings.(34 micro bearings) Seesaw head with bell-hiller system. CCPM collective pitch mechanism (variable pitch). Extensive upgrade parts and option parts available. Specification: Overall length: 415mm (including cabin & canopy) Main rotor diameter: 428mm Tail rotor diameter: 100mm Motor: KV4800 brushless motor (included) ESC : 12A ESC (included) Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.) Main rotor blades: SP Blades(included) or Wooden(option) Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery Items needed for assembly: 6 (or more) channel heli-capable transmitter (with CCPM function) 4 Micro servos (BMS 306BB servo is recommended) 6 (or more) channel micro receiver Gyro ( GU -210 heading hold gyro or higher level are recommended) Battery : Li-Po battery (7.4v~11.1v/800mah) Charger: Li-Po battery charger
$369.95