Radio-Controlled-Hobbies.com

The Extra 330 ARC is a great aerobatic airplane. The Extra 330 is an airplane that can do all the smooth aerobatics as well as all the wild 3D maneuvers. The kit includes a light-ply fuselage and cowling done in red, white, yellow, and blue. The wings are sheeted foam and covered with matching covering. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The leading edge of the wing is pre-shaped. The kit includes full color decals.

This is a wholesale case of Shark Magnate 25 in. Fiberglass RTR Electric RC Boat. This is the new Shark Magnate 25 in. Fiberglass Electric RC Boat. Highly detailed features make this boat one of a kind. This RC boat comes with a high performance racing motor for super fast speeds and great maneuvering capabilities.

This is a wholesale case of Dolphin Sea Fairy 23 in. Fiberglass RTR Electric RC Boat. This is the new Dolphin Sea Fairy 18 in.Fiberglass Electric RC Boat. Highly detailed features make this boat one of a kind. This RC boat comes with a high performance racing motor for super fast speeds and great maneuvering capabilities.

The 2.4GHz Genesis 450PE (Premium Edition) is a 100% RTF (Ready-to-Fly) FULLY-LOADED Advanced 3D RC Helicopter which features the highest quality aluminum rotor head and tail system. It uses thrust bearings and a 4mm feathering shaft in the main rotor holders for very smooth rotation under high speed. During hard core 3D flight, its actions are very quick and precise. The Genesis 450PE is combined with the Alpha 400 high torque brushless motor and 30A Volcano Speed controller for great power and efficiency. Also included in this ready-to-fly kit is a 11.1v Lithium battery with 1800mAh and 15C rating. The CNC precision cut frame on this heli improving rigidity and its perfect design makes loops and rolls more controlled. The improved direct Cyclic collective Pitch Mixing or CCPM system allows simultaneous power-saving control of AILE, ELEV, PIT servos. The tail design with dual ball bearings gives you the absolute smoothest pitch motion and makes your gyro more efficient. Aluminum alloy drive pulley and tail drive pulley, add strength and durability to the tail belt system. When it comes to gear, it is absolutely quiet! The belt actually goes on the main gear! There is no secondary gear to mess with or make noise. It is real smooth, They fly with authority yet are light and very nimble. Included, fiberglass canopy, carbon fiber main and tail blades, INA German one-way bearing, high strength ball links and stainless steel linkage balls on the whole unit, featuring wear resistance, and anti-oxidization. This new Exceed RC Genesis 450PE really is the highest quality 450 size heli you can get. Package Contents: 2.4G Genesis 450PE RC Helicopter (100% Assembled RTF) 'Fully Loaded Premium Edition' by Exceed RC Included Electronics: Alpha 400 Brushless Motor, 30A Esc, Professional Head-Lock Gyro, LiPo Battery, 4 9G Servos 2.4 GHZ Digital 6 Channel Multifunctional Exceed R/C Transmitter TX Cable + Programming Software Main Blade Holder Cable Ties English Manual NOT INCLUDED - Lipo charger. Must be purchase separately. Need technical support? Get FREE HELP via RCDiscuss.com "Another AWESOME 3D Radio Controlled Helicopter by Exceed RC! FULLY-LOADED 2.4GHz System. Don't let the price fool you. You will NOT be disappointed. Guaranteed!" Latest 2.4Ghz Technology New 2.4G Spread Spectrum technology in the Genesis 450PE kit allows the transmitter and receiver to be 'locked-on' to the

This is the radio controlled, glow powered, almost ready to fly Ultimate Biplane Giant 120 Scale RC Airplane. For Intermediate to Advanced Modeler/Flyers. Ultimate Biplane 120 ARF comes with its two wings completely assembled. No more gluing wing-spar pieces and aligning and gluing wing halves together. These wings, like the rest of the kit, are beautifully built, sanded and covered with polyester covering. The kit also comes with mounted struts, a painted fiberglass cowl and molded wheel pants and hardware Wing span: 55in / 1400mm Wing area: 1046 sq in / 67.5 sq dm Flying weight: 10lb / 4500g Fuselage length: 60 in / 1530 mm Engine Required: 4c 1.40 cu in Radio Required: 4 -5channels,5-6servos

Tiger Moth - 120 Giant Scale Radio Remote Control RC Bi-Plane ARF Top quality balsa and plywood construction , All wood constructions with fiberglass parts , Trimmed and painted cowling by fuel proof pai , Hand iron-on color covering ,Comes with all hardware and accessories Wing span: 76in / 1930mm Wing area: 1830sq in / 118 sq dm Flying weight: 9.0lb / 4086g Fuselage length: 65.5 in / 1664 mm Engine Required: 4c 1.40cu in Radio Required: 4 channels,5 servos

The B-25 originated in a request for a twin-engine bomber airplane that could out-perform existing single-engine types. 71.0" wingspan, 55.0" long, 778.0 sq. in. wing area, 9.3 lb. flying weight. Amazing detail, the art of the B-25 Mitchell rc model airplane brought to a new level. All Laser Cut Balsa/Plywood construction. Comes with fuel tanks, landing gears, screws and hardware. The mass balances on the elevator are faithfully reproduced. The aircraft is very high quality, high detail, right down to the gun sights. While a great deal of work has been done (about 90% done), there is still a little assembly for you to do. Included is also a illustrated instruction manual. Flight performance is very good with the .52 engines that we recommend and the plane is easy to fly. Landings are slow and soft. Five channels are required: (11 servos). FEATURES: Top quality balsa and plywood contruction. One of the finest ARF kits on the market All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color covering Comes with all hardware and accessories SPECS: Wing span: 71 in / 1800 mm Wing area: 778 sq in /50.5 sq dm Flying weight: 9.3lb / 4200g Fuselage length: 55 in / 1400mm Engine Required: 4c 0.52 cu in # Servos Required: 11 servos Channels: 5 total - Elevator, Aileron, Rudder, Throttle, Flaps Requirements: Engine: (2) .52 (2-stroke); .60 (4-stroke) Engine Recommended: (2) O.S. FS-70 II Surpass Radio Recommended: JR 6102 Transmitter w/ JR R700 7 Channel FM Slimline Rx Servos Required: (11) JR DS811 - Elevator (2), Aileron (2), Rudder (3), Throttle (2), Flaps (2) Items Needed To Complete 5 Channel Radio w/ 11 Standard High-Torque Servos Two .46 - .52 2-stroke or Two .60 - .70 4-Stroke Glow Engines Eight 24" Servo Extensions Two 36" Servo Extensions Six "Y" Cords 2 Spinners (2 1/2") Fuel Line CA Glue 30-min Epoxy Various Standard Shop Tools Brief history: The B-25 was the first multi engine bomber designed for the United States' Army Air Corps before the Second World War and made immortal on April 18, 1942, when it became the first United States aircraft to bomb the Japanese mainland. They were the heaviest aircraft at the time to be flown from a ship at sea. The original design had shoulder-mounted wings and a crew of three in a narrow fuselage. The North American company had never designed a multi-engine bomber before. The USAAC then decided its new bomber would need a much larger payload -- double the original specifications. North American designers dropped the wing to the aircraft's mid-section, and widened the fuselage so the pilot and co-pilot could sit side-by-side. They also improved the cockpit. First impressions are important, and at first

Walkera Dragonfly Series 68 is a Full Metal Frame 3D Electric RC Helicopter that congregates the advantages of these items (helicopters) such as: #36,#36B,#37,#60,#60B, #62B, and etc. Feature: New 7 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , rudder mixing, throttle curve, servo exponential function, rudder exponential functions, and multistage electricity volume show on the panel 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) Brand new design for the structure; Metal main frame NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage Highly efficient bevel wheel design is used in mesh between main gear and motor gear Outer-rotor motor as the main power is powerful and makes the flight much stable 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced CCPM mode with adjustable pitch system and 3D conversion Autorotation landing protection One-way bearing and landing system with flameout function Tail rotor driven by belt transmission system provide stable flight and low noise Mode lock switch to free lock the parameters of PIT & PLT Main rotor driven by powerful Brushed Motor and tail rotor driven by belt transmission system NO TAIL Motor - Tail Rotor driven by belt transmission system with Servo Controlled Rudder like Gas-Helicopter Highly efficient bevel wheel design is used in mesh between main gear and motor gear. No need to worry about burning tail motors Tail blade adopt flameout landing system Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing Perfect for people who wants to move up from 4ch helicopter PCM receiving and transmitting system increases the operation stability Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying Almost Unbreakable Rotor Head High quality individual lock tail gyro Outer placed gyro Provide excellent performance outdoor and indoor Easy to fly and more stable lifting Weight is a key to a EP helicopter, lightened skid set, m

The CH-47 Chinook is a versatile, twin-engine, tandem rotor heavy-lift radio controlled rc helicopter. Fully loaded, including aluminum/metal upgrades and packed with plenty of power. By far the most impressive radio control helicopter in the world now. You won't be disappointed. Specification 1).All-up Weight: 768g (Battery included) 2).Main Rotor Dia. B: 450mm 3).Main Rotor Dia. A: 450mm 4).Overall Length: 575mm 5).Battery: 7.4V 2200mAh Li-Po 6).Receiver: RX-2409 7).Drive System: 4 X 370SH 8).Transmitter: WK-2401 9).Servo: WK-7.6-3 weight 8.5g;speed 0.11sec/60o(4.8V); torque 0.9kg.cm(4.8V); dimension 22.5X11.5X24mm Features 1). Highly emulational shape with the-state-of-the-art workmanship. 2). New 2.4G technology, with the functions of automatic identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. 3). It utilizes the 2.4G 3-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment. 4). High performance 4 * 370SH motor powered by 7.4V 2200mAh Lipo offers 10 minute flight time, depending on the flight modes. Main rotor blades set Swash plate Receiver(RX-2409) Transmitter(2.4G)

The CH-47 Chinook is a versatile, twin-engine, tandem rotor heavy-lift radio controlled rc helicopter. Fully loaded, including aluminum/metal upgrades and packed with plenty of power. By far the most impressive radio control helicopter in the world now. You won't be disappointed. The CH-47 Chinook is a versatile, twin-engine, tandem rotor heavy-lift radio controlled rc helicopter. Features 1). Highly emulational shape with the-state-of-the-art workmanship. 2). New 2.4G technology, with the functions of automatic identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. 3). It utilizes the 2.4G 3-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment. 4). High performance 4 * 370SH motor powered by 7.4V 2200mAh Lipo offers 10 minute flight time, depending on the flight modes. Main rotor blades set Swash plate Receiver(RX-2409) Transmitter(2.4G) Specification 1).All-up Weight: 768g (Battery included) 2).Main Rotor Dia. B: 450mm 3).Main Rotor Dia. A: 450mm 4).Overall Length: 575mm 5).Battery: 7.4V 2200mAh Li-Po 6).Receiver: RX-2409 7).Drive System: 4 X 370SH 8).Transmitter: WK-2401 9).Servo: WK-7.6-3 weight 8.5g;speed 0.11sec/60o(4.8V); torque 0.9kg.cm(4.8V); dimension 22.5X11.5X24mm

The F-22 program is developing the next-generation air superiority fighter for the Air Force to counter emerging worldwide threats. It is designed to penetrate enemy airspace and achieve a first-look, first-kill capability against multiple targets. The F-22 is characterized by a low-observable, highly maneuverable airframe; advanced integrated avionics; and aerodynamic performance allowing supersonic cruise without afterburner.This F-22 holds the same beautiful lines as the original fighter jet. The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low. It becomes a stable aircraft with excellent performance. RTF (Ready To Fly) Version with transmitter and receiver Specification: Wingspan: 745mm (29.5 in) Length: 916mm (36 in) Flying Weight: 730g (25.5 oz) Wing Load: 35.4g/dm² Wing Area: 20.6dm² Drive System: Twin EDF55 Ducted Fans with Brushless Motors Servo: 3X 9g high speed micro servos Speed Controller: 2X 18amp Brushless Speed Control Battery: 11.1V 2000mah 18C Li-Polymer Control system: 4 CH Multifunctional FM Radio Transmitter and 6 CH Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) 4 Channel Digital Proportional FM PPM High Quality and Performance Futaba Compatible Radio System Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low 2 Powerful twin ducted fans with brushless motors makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down One of the best ducted fan jet in the market! State of the art components such as Twin EDF55 Ducted Fans with Brushless Motors, Twin 18amp Brushless Speed Control, and 2000mAh 11.1 V 18C Li-Po Battery Pack Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance

New SE 450 Special Edition All Aluminum Mini Size 3D Electric Radio Remote Controlled RC Helicopter ARF w/ Fiber Glass Canopy!! Features ?Main shaft and tail rotor shaft running by direct transmission belt, which reduce the intermediate transmission energy loss. ?Read Axle screw used high-intensity M2.5 screw to meet the high-speed rotating of the blade. ?The up main shaft bearing block and bottom main shaft bearing block adopt integrated structure, which guarantee the main shaft running smoothly. ?The adjustable Aluminum battery mounting plate can meet different size of battery. ?The Read Axle of the blade used 4mm steel shaft to meet the hard 3D flight. ?4mm width transmission belt, reducing the slip possibility of the Tail Rotor Drive Belt. ?Their Cowling made with lighter colored glass fiber. ?Safety and convenience Linkage ball. ?All the aluminum part for this TG-450 from CNC Machinery ?Flip-gyroscope sensor structure ?High-intensity hexagonal screw up to +-14 degree. ?120 degree ECCPN SYSTEM It comes disassemble in the box!! Everything need to be built. Professional installation required. Specifications & Equipment ?Length: 656mm ?Height: 249mm ?Main Rotor Diameter: 714mm(320 Blades) ?Tail Rotor Diameter: 147mm ?Motor Pinion Gear: 12T/13T ?Main Drive Gear: 150T ?Drive Gear Ratio: 1:12,5:4.3(12T) 1:11.51:4.3(13T) ?Weight: 380g ?Flying Weight: 780g-820g Recommended Power and Radio Equipment (NOT included in kit) ?Li-Poly Battery: 11.1v/(1500mAh or more) ?Transmitter: 6 channel or more ( Helicopter System) ?Receiver: 6 channel or more ?Gyro: 1pc ?Servo: 3pcs ?Rudder servo: 1pc ?Brushless Motor: 3200kv-4000kv ?ESC: 11.1v/(25A or more) It comes disassemble in the box!! Everything need to be built. Professional installation required. It comes disassemble in the box!! Everything need to be built. Professional installation required.