Radio-Controlled-Hobbies.com

The Extra 330 ARC is a great aerobatic airplane. The Extra 330 is an airplane that can do all the smooth aerobatics as well as all the wild 3D maneuvers. The kit includes a light-ply fuselage and cowling done in red, white, yellow, and blue. The wings are sheeted foam and covered with matching covering. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The leading edge of the wing is pre-shaped. The kit includes full color decals.

New EXTRA 330L - 50 CC Giant Scale 3D Radio Controlled Plane Specifications: Wing Span: 2060mm / 81in Fuselage length: 1900mm / 75 in Flying weight: 6500g - 7000g Wing area:1209sq in / 78.5 sq dm Engine/Electronics Required: Gas Engine: 45-50cc Radio Required: 6 Channels ; 6-7 Servos

P-38 Lightning - 52 Twin Engine ARF RC Warbird Plane I don't know about you, but when I hear the term "Twin Engine", only a handful of planes immediately come to my mind. At the top of that list is Lockheed's illustrious P-38 Lightning. Throw the term "WWII Fighter" into the equation and I can't think of another. It's also one of those planes that I have always wanted to model, but too often it was either cost, or labor prohibitive. Now NitroModels has rendered the peerless "Forked-Tail Devil" in ARF form for under $250. 90.0" wingspan, 67.0" long, 1085.0 sq. in. wing area, 12 lb. flying weight. Amazing detail, the art of the P-38 model airplane brought to a new level. All Laser Cut Balsa/Plywood construction. Comes with fuel tanks, landing gears, screws and hardware. The mass balances on the elevator are faithfully reproduced. The aircraft is very high quality, high detail, right down to the gun sights. While a great deal of work has been done (about 90% done), there is still a little assembly for you to do. Included is also a illustrated instruction manual. Flight performance is very good with the .52 engines that we recommend and the plane is easy to fly. Landings are slow and soft. Five channels are required: (11 servos). Key Features Our evergreen model airplane Top quality balsa and plywood construction One of the finest ARF kits on the market All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Pre-hinged flaps for smoother landing Hand iron-on color covering Comes with all hardware and accessories Name: NitroModels 90" P-38 Wingspan: 90 in / 2300mm Wing Area: 1085 sq in / 70sq dm Length: 71 in (180.3 cm) Flying Weight (advertised): 12 lb / 5500g Flying Weight: (actual) 12.5 lb Channels: 5 total - Elevator, Aileron, Rudder, Throttle, Flaps Requirements: Engine: (2) .52 (2-stroke); .60 (4-stroke) Engine Recommended: (2) O.S. FS-70 II Surpass Radio Recommended: JR 6102 Transmitter w/ JR R700 7 Channel FM Slimline Rx Servos Required: (11) JR DS811 - Elevator (2), Aileron (2), Rudder (3), Throttle (2), Flaps (2) Items Needed To Complete 5 Channel Radio w/ 11 Standard High-Torque Servos Two .46 - .52 2-stroke or Two .60 - .70 4-Stroke Glow Engines Eight 24" Servo Extensions (* See Note) Two 36" Servo Extensions (* See Note) Six "Y" Cords (* See Note) 2 Spinners (2 1/2") Fuel Line CA Glue 30-min Epoxy Various Standard Shop Tools *Note: The P-38 lends itself nicely to a 2 Receiver configuration. This would eliminate many of the required "Y" Cords and Extensions. First impressions are important, and at first glance, the P-38 gooks great. The quality of the wood is very good, and the construction is excellent. The Canopy,

"There's no other planes like the Super Falcon 120 today!" High quality laser-cut design along with unmatched performance from competitions, the new Super Falcon 120 is NitroModels' newest pusher jet and is one of the fastest jet in the world today! Comes almost-ready-to-fly, all you need to do is to add your favorite electronics along with a 120~160 size engine and you will be guaranteed to impress everyone at the flying field! And best of all, you do not need to break the bank to feel the joy of flying a turbine-like jet but rather you will be enjoying the constant attentions you will be receiving! All Fiberglass Fuselage construction with high durability color matched paint scheme. The wing design incorporates a high efficiency airfoil using ultra modern construction techniques. Wing Span : 63 in / 1600mm Wing Area : 1007sq in / 65sq dm Flying Weight : 12.3 lb / 5600 g Fuselage Length: 76.8in / 1950mm Engine Required : 1.20 2c or 1.60 4c ; Radio Required: 6 channels ; Servos: 11 WHAT YOU GET The Super Falcon 120 box comes loaded with all of the bits and pieces that you expect to get with a premium ARF and features all laser-cut balsa and fiberglass fuselage construction. * Fixed landing gear included w/ Optional pneumatic or electric retractable landing gear.

This is the radio controlled, glow powered, almost ready to fly Ultimate Biplane Giant 120 Scale RC Airplane. For Intermediate to Advanced Modeler/Flyers. Ultimate Biplane 120 ARF comes with its two wings completely assembled. No more gluing wing-spar pieces and aligning and gluing wing halves together. These wings, like the rest of the kit, are beautifully built, sanded and covered with polyester covering. The kit also comes with mounted struts, a painted fiberglass cowl and molded wheel pants and hardware Wing span: 55in / 1400mm Wing area: 1046 sq in / 67.5 sq dm Flying weight: 10lb / 4500g Fuselage length: 60 in / 1530 mm Engine Required: 4c 1.40 cu in Radio Required: 4 -5channels,5-6servos

The Leo (110 ENGINE POWER (F3A) AEROBATIC AIRCRAFT ) is the largest one from the CMPro F3A style aerobatic series. The plane is ready covered under attractive pattern with great color contrast. The Leo is designed to give super performance on .110 four strokes, thus anyone wishing to try precision aerobatics without spending large amount of building time can do so. Wingspan 1740mm Length 1770mm Weight 4.2~~4.4 kg Wing Loading 77~~81 dm/2 Airfoil Naca 0012 Wing Area 54.2 dm/2 Radio Control 4~~5 Ch 5~~6 Servos purchase separately 4 Strok Engine 110 purchase separately Carbon fiber cowling and belly pan with fine painting. Carbon fiber landing gear ?strong, light and durable. The Leo is very easy to build as all parts are pre finished at factory. Plywood engine mount is already fitted to ease assembly.An anti-vibration mount is also supplied with kits. All-balsa fuselage & one-piece rib wing.The rib tailplane also comes in one-piece for simple assembly. Retractable undercarriage can be fitted as an option.

40cc~50cc GAS ENGINE POWER AEROBATIC AIRCRAFT ALMOST READY-TO-FLY RADIO CONTROLLED The Edge-540T (2000mm) ARF is a new member added to the CMPro aerobatic series. Agile and impressively coloured, it causes heads to turn. Construction is built-up balsa throughout except for the cowl and spats, this results in a light model. Our maximum for it is ?It can if you can?! Wingspan 2000mm Length 1813mm Weight 6.65~6.85 kg Wing Loading 105~108 dm/2 Airfoil Naca 0012 Wing Area 63 dm/2 Radio Control 4 Ch 6 Servos purchase separately Gas Engine 40~50cc purchase separately This model has a shorter tail movement than the Giles? and is capable of some impressive ?flick? maneuvers. The whole plane is pre-decorated in eye-catching color design. Decals come ready applied and protected by a clear coat. The full aileron design enhances 3D performance. It can put on a magnificent display in the right hand! Nicely painted Polystyrene wheel pants are light and durable. Removable top hatch, easy to install, provides plenty room for assembly. Engine is to be mounted from the front which makes assembly easy and fun. All components are supplied pre-finished, with a quality hardware pack included.

The EMB 312 Tucano is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is cover with a top quality military color scheme coating (similar to monokote). Once in the air, the EMB 312 truly shines with its exceptional flight characteristics. The wing loading has been optimized to make it exceptionally nimble and capable of a variety of different maneuvers. The EMB 312 Tucano RC Plane can perform loops easily from level flight. Crisp rolls, loops, inverted flight and more are all possible with the EMB 312 Tucano Nitro Powered RC Airplane! The EMB 312 Tucano is a low-wing turboprop-powered two seat basic-advanced military trainer aircraft Recognition features include low-set unswept wings. The rudder extends beyond the trailing edge of the tailplane. Large clear view canopy covering the tandem cockpit, with the rear seat higher than the front. Large exhausts on the forward cowling sides Wing Span : 65 in / 1650 mm Wing Area : 662 sq in / 43 sq dm Flying Weight : 9.25lb / 4200 g Fuselage Length : 59 in / 1500 mm Engine Required : 4 C: 1.20 cu in Radio Required : 5channels ; 8 - 9 servos Brief History The Tucano, known in Brazil as the T-27, is used in the missions of basic training, tactical support and war against drugs. This basic trainer is a aircraft with tandem seats. The Tucano was sold to Brasilia, Egypt, Honduras, Iraq, Venezuala, Peru, Argentina, Paraguay and Iran. A modified version, developed together with Shorts, was sold to the British RAF. There is also a production line in Egypt. The Embraer EMB.312 was born of a request by the Brazilian Aeronautics Ministry to design a basic trainer that could replace the T-37C which was then in use by the Brazilian Air Force. Designed in 1978 under Joseph Kovacs, the EMB.312 is a single-engine turboprop, low wing, equipped with a turbine Pratt &Whitney Canada PT6A-25C of 750shp, driving a three-bladed propeller, with student and instructor sitting in tandem under a single hood, opening sidelong. The ejection seats are placed so that the instructor, sitting behind in a higher position, has almost complete visibility ahead. On 6 December 1978, the Ministry of Aeronautics and Embraer signed an initial contract of development, including two prototypes and two examples for fatigue testing. The first prototype took off for the first time on 16 August 1980, registered as FAB 1300; the second prototype, FAB 1301, accomplished its first flight in December of the same year. A third prototype, incorporating the modifications foreseen for incorporation into the production models, received the experimental civilian registration PP-ZDK, and flew on 16 August 1982. The EMB.312 was christened Tucano (Toucan); receiving the FAB designation T-27 (or AT-27, for those used in light attack missions). From the 168 examples acquired, the first six examples were to equip the FAB Air Demonstration

NitroModels is proud to present to the world our first 4-ENGINE warbird - an all-new radio controlled B17 Flying Fortress made almost-ready-to-fly for under 200 bucks! 90% of the works are done already and all that is left for you to do is just a few hours of installing your favorite electronics and it'll be set to fly and impress fellow hobbyists in your club!!! Made from high quality balsa woods that were specially imported from Germany (applies to all of our NitroModels Series) and tough fiberglass parts, this aircraft is sure to make a lot of noises on and off the field. IMAGINE FOUR BRUSHLESS MOTORS POWERING THIS BABY!!! THE B17 WILL ROCK FOR SURE!!! Specifications: Wing Span: 65 in/1650 mm Wing Area: 548.7 in/sq35.4 dm Flying Weight: 4.5 lbs/2100g Fuselage Length: 46.7 in/1187 mm Requirements & Recommendations Li-Poly: 11.1v 1800-2200 mAh x 2 pcs Propeller:8*5*4 pcs Out runner Brushless Motor: 400T x 4pcs Radio Required: 4ch 5 servos Speed Control: 15-25 Amp x 4pcs The B-17 Flying Fortress has become, for many reasons, an icon of American power and a symbol of its Air Force. It achieved a lasting fame in the general public, which has eluded most other bomber aircraf. Observers of the B-17 often described it as elegant and graceful. Pilots and crews fell in love with her after her sturdiness, strength, reliability, forgiveness, and usefulness were exhibited. The Army Air Corps, after original misgivings, found it an ideal aircraft to prove its strategic bombing concept of daylight precision bombing.

The EMB 312 Tucano is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is cover with a top quality military color scheme coating (similar to monokote). Once in the air, the EMB 312 truly shines with its exceptional flight characteristics. The wing loading has been optimized to make it exceptionally nimble and capable of a variety of different maneuvers. The EMB 312 Tucano RC Plane can perform loops easily from level flight. Crisp rolls, loops, inverted flight and more are all possible with the EMB 312 Tucano Nitro Powered RC Airplane! The EMB 312 Tucano is a low-wing turboprop-powered two seat basic-advanced military trainer aircraft Recognition features include low-set unswept wings. The rudder extends beyond the trailing edge of the tailplane. Large clear view canopy covering the tandem cockpit, with the rear seat higher than the front. Large exhausts on the forward cowling sides Wing Span : 65 in / 1650 mm Wing Area : 662 sq in / 43 sq dm Flying Weight : 9.25lb / 4200 g Fuselage Length : 59 in / 1500 mm Engine Required : 4 C: 1.20 cu in Radio Required : 5channels ; 8 - 9 servos Brief History The Tucano, known in Brazil as the T-27, is used in the missions of basic training, tactical support and war against drugs. This basic trainer is a aircraft with tandem seats. The Tucano was sold to Brasilia, Egypt, Honduras, Iraq, Venezuala, Peru, Argentina, Paraguay and Iran. A modified version, developed together with Shorts, was sold to the British RAF. There is also a production line in Egypt. The Embraer EMB.312 was born of a request by the Brazilian Aeronautics Ministry to design a basic trainer for use by the Brazilian Air Force. Designed in 1978 under Joseph Kovacs, the EMB.312 is a single-engine turboprop, low wing, equipped with a turbine Pratt &Whitney Canada PT6A-25C of 750shp, driving a three-bladed propeller, with student and instructor sitting in tandem under a single hood, opening sidelong. The ejection seats are placed so that the instructor, sitting behind in a higher position, has almost complete visibility ahead. On 6 December 1978, the Ministry of Aeronautics and Embraer signed an initial contract of development, including two prototypes and two examples for fatigue testing. The first prototype took off for the first time on 16 August 1980, registered as FAB 1300; the second prototype, FAB 1301, accomplished its first flight in December of the same year. A third prototype, incorporating the modifications foreseen for incorporation into the production models, received the experimental civilian registration PP-ZDK, and flew on 16 August 1982. The EMB.312 was christened Tucano (Toucan); receiving the FAB designation T-27 (or AT-27, for those used in light attack missions). From the 168 examples acquired, the first six examples were to equip the FAB Air Demonstration Squadron and thes

AT-6 Texan 160 - 82" ARF Nitro Gas Radio Remote Controlled Warbird Airplane The AT-6Texan is available in two stunning color schemes, pick the one that suits you best. Decals are already applied on the fusealge under clear coating for more durable use. This contains a fiberglass fuselage. Wing panel, elevator & tailplane are painted over high-quality balsa wood. The wing section is also fiberlgass moulded *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Specs: Wingspan 82" Fuselage Length 55" Recommended Engine Size 2c/160 Flying Weight 11.9 lbs - 12.3 lbs Wing Area 1,007 sq in Radio 4~~5 Ch 5~~6 Servos Airfoil NACA 2415 Features The AT-6 Texan is available in two stunning color schemes. Pick the one that suits you best! Decals are already applied on the fuselage under clear-coating for more durable use and shortens building time. The fuselage is fiberglass-moulded to maximize scale look. Wing panel, elevator and tailplane are painted over high-quality balsa wood. Accompanied by a painted canopy. To achieve a more scale appearance, the wing center section is also fiberglass-moulded. Design also allows optional retract fittings for easy assembly! ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada.

SPITFIRE-60 Almost-Ready-To-Fly Nitro Gas RC Airplane. The most popular Spitfire-60 Airplane. This rc plane is awesome. Engine and Radio are not included Features Functional flaps for smoother landing Pre-Installed retracts operating in the scale manner Scale plastic spinner with aluminum backplate Pre-Painted Fiberglass cowling with 3-D Template Detailed warbird pilotwith removable hemlet Painted camouflage color scheme Comes with all hardware and accessories Specifications Wing Span: 63 in / 1600 mm Wing Area: 713 sq in / 46 sq dm Flying Weight: 7.5 lbs / 3400 g Fuselage Length: 52.8 in / 1340 mm Engine Required: 2c 0.61 cu in 4c 0.70 cu in Radio Required: 6 channels, 7 servos